•
Press the AS MXC offline/online button until the LED light turns green.
•
Issue the following CLI command:
user@host> request chassis pic fpc-slot fpc-slot pic-slot pic-slot online
For more information about the command, see the CLI Explorer.
The normal functioning status LED confirms that the AS MXC is online. You can also
verify correct AS MXC functioning by issuing the show chassis fpc pic-status command.
Figure 103: Installing an AS MXC
Related
Documentation
Preventing Electrostatic Discharge Damage to an MX240 Router on page 444•
• MX240 Application Services Modular Processing Card Description on page 87
• Replacing an MX240 AS MXC on page 331
253Copyright © 2017, Juniper Networks, Inc.
Chapter 21: Installing Components
To Next Page
Loading...
