WARNING:
Translation from Japanese: The attachedpower cable is onlyfor this product.
Do not use the cable for another product.
NOTE: In North America, AC power cords must not exceed 4.5 m
(approximately 14.75 ft) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3). You can order AC power cords that are in
compliance.
WARNING: The router is pluggable type A equipment installed in a
restricted-access location. It has a separate protective earthing terminal
(sized for UNC 1/4-20 ground lugs) provided on the chassis in addition to the
grounding pin of the power supply cord. This separate protective earthing
terminal must be permanently connected to earth.
CAUTION: Power cords and cables must not block access to device
components or drape where people could trip on them.
Related
Documentation
• MX240 AC Power Supply Description on page 90
• Connecting Power to an AC-Powered MX240 Router with Normal-Capacity Power
Supplies on page 199
• Replacing an MX240 AC Normal-Capacity Power Supply on page 335
• Replacing an MX240 AC Power Supply Cord on page 337
• MX240 AC Power Electrical Safety Guidelines and Warnings
• AC Power Supply Electrical Specifications for the MX240 Router on page 127
Copyright © 2017, Juniper Networks, Inc.142
MX240 3D Universal Edge Router Hardware Guide
To Next Page
Loading...
