• Issue the CLI show chassis fpc command to check the status of installed MPCs. As
shown in the sample output, the value Online in the column labeled State indicates
that the MPC is functioning normally:
user@host> show chassis fpc
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Online 36 3 0 2048 14 13
1 Online 40 5 0 2048 26 13
2 Online 41 6 0 1024 7 43
For more detailed output, add the detail option. The following example does not specify
a slot number, which is optional:
user@host> show chassis fpc detail
Slot 0 information:
State Online
Temperature 36 degrees C / 96 degrees F
Total CPU DRAM 2048 MB
Total RLDRAM 806 MB
Total DDR DRAM 2632 MB
Start time: 2009-12-22 12:27:04 PST
Uptime: 6 days, 3 hours, 8 minutes, 41 seconds
Max Power Consumption 450 Watts
Slot 1 information:
State Online
Temperature 40 degrees C / 104 degrees F
Total CPU DRAM 2048 MB
Total RLDRAM 1324 MB
Total DDR DRAM 5120 MB
Start time: 2009-12-22 12:27:02 PST
Uptime: 6 days, 3 hours, 8 minutes, 43 seconds
Max Power Consumption 440 Watts
Slot 2 information:
State Online
Temperature 41 degrees C / 105 degrees F
Total CPU DRAM 1024 MB
Total RLDRAM 128 MB
Total DDR DRAM 2048 MB
Start time: 2009-12-22 12:26:48 PST
Uptime: 6 days, 3 hours, 8 minutes, 57 seconds
Max Power Consumption 265 Watts
• Issue the CLI show chassis fpc pic-status command. The MPC slots are numbered 1/0,
1, and 2, bottom to top:
user@host> show chassis fpc pic-status
Slot 0 Online MPC Type 2 3D EQ
PIC 0 Online 1x 10GE XFP
PIC 1 Online 1x 10GE XFP
Slot 1 Online MPC 3D 16x 10GE
PIC 0 Online 4x 10GE(LAN) SFP+
PIC 1 Online 4x 10GE(LAN) SFP+
PIC 2 Online 4x 10GE(LAN) SFP+
PIC 3 Online 4x 10GE(LAN) SFP+
Slot 2 Online MS-DPC
Copyright © 2017, Juniper Networks, Inc.394
MX240 3D Universal Edge Router Hardware Guide
To Next Page
Loading...
