1 Safety Notes
1.2 Operator responsibilities
Page 10 Docu-No.: 1090020601-EN Rev. 1.2.1
1.1.1 Electrical Hazard Icon
1.1.2 Ground Icon
1.1.3 ATEX Icon
1.2 Operator responsibilities
This sign indicates an electrical hazard. It is located on covers and
doors. Only qualified personnel are allowed to remove these covers or
open the doors.
This sign indicates that a ground/PE connection is required.
Important information to explosion protection.
▲ For install and the mounting for explosion-proof equipment
following and observe the standards and directives:
Standards 99/92EG (ATEX 137)
▲ Ensure that only qualified and trained personnel work with the
device.
▲ Establish personnel responsibilities for operation and
maintenance.
▲ Ensure that personnel have read and understood the operating
instructions to all installation components, particularly these safety
notes.
▲ The operator must have damaged or missing components
replaced immediately.
▲ The operator of the equipment is responsible for compliance with
the legally prescribed accident and safety regulations.
To Next Page
Loading...
Need help?
General