7 Operation
7.2 Emergency stop procedure
Page 72 Docu-No.: 1090020601-EN Rev. 1.2.1
7.2 Emergency stop procedure
• Each KCM must have a main switch to supply its main power.
• The main switch should be within easy reach of the operator
To shutdown the KCM quickly, switch off the appropriate main
switch.
7.3 Switching ON and OFF
Use the main switch to remove or apply power to the KCM.
Use the front mounted LEDs to verify power has been applied.
Review the project manual to operate the feeding equipment
respectively.
To Next Page
Loading...
