Docu-No.: 1090020601-EN Rev. 1.2.1 Page 11
Safety Notes 1
Proper use 1.3
1.3 Proper use
1.4 Special provisions X
1.5 Organizational measures
1.6 Safety-conscious operation
▲ The operation of the device in hazardous areas is only allowed in
areas with classification zone 22.
▲ Only operate the device in conjunction with the feeder equipment
from K-Tron.
▲ Only operate the device in accordance with the specified technical
data.
▲ Avoid larger dust deposits on the device.
▲ Protect from direct sunlight.
▲ When processing dangerous materials, also comply with the
safety notes which govern the handling of such materials.
▲ Any modifications and changes on safety devices are prohibited
▲ Do not use the equipment in a manner not intended by the
manufacturer.
▲ Do not use the equipment in a manner not intended by the
manufacturer.
▲ The equipment must be protected against direct sunlight.
▲ Observe the safety notes for the connected feeding devices.
▲ In addition to the operating instructions, always comply with
generally prescribed safety regulations governing accident
prevention and environmental safety.
▲ Read the operating instructions, in particular these safety notes,
and follow these instructions.
▲ Ensure that only authorized personnel enter the working and
danger area of the equipment.
▲ Any changes (including changes in the operational behavior)
which affect safety must be immediately reported to the
responsible member of the staff.
▲ Always keep safety in mind while working.
▲ Before working on the equipment always switch the feeding
equipment off at the main power switch.
To Next Page
Loading...
Need help?
General