3 Technical Data
2.4 Safety devices and warnings
Page 22 Docu-No.: 1090020601-EN Rev. 1.2.1
3 Technical Data
Specification Limitations Notations
Manufacturer K-Tron
Device name KCM
KCM SS
Device marking KCM
(only ATEX devices)
II 3D Ex tc IIIC T65°C IP65
T
amb
-20 to +50°C
0590024903-D X
See declaration of conformity
Device marking KCM SS
(only ATEX devices)
II 3D Ex tc IIIC T65°C IP65
T
amb
-20 to +40°C
1190021904-A X
See declaration of conformity
Service application KCM must only be installed in an
industrial or manufacturing power
environment. Connection in a
residential power system is not
permitted.
Power line/supply 103 - 264 VAC
Line frequency 47-63 Hz
Inrush current-maximum
20A
Size H x T x B 325 x 130 x 310 mm
Weight 7,2kg (16lb)
Operating temperature 0 to +50°C (32 to +122°F) KCM for 1600W DC Drive in
stainless steel housing only up to
40°C, 104°F
Storage temperature -25 to +80°C (-13 to +176°F)
Maximum ambient
humidity
<95% at 35°C (95°F)
non condensing
Pollution degree Category II
Over voltage category Category II
Table page 1 of 6
To Next Page
Loading...
