2 Assembly and Function
2.2 Overview
Page 18 Docu-No.: 1090020601-EN Rev. 1.2.1
2.2 Overview
The KCM is the controller member of the SmartConnex II family. This
family is comprised of a KCM feeder controller, a KSU-II remote
display unit, a K-Vision for up to 16 feeders and a KSC for interface
for up to 30 feeders.
The KCM is comprised primarily of a cpu pc board, and a drive pc
board. Drive choices include a 1600 watt DC drive, a 450 watt DC
drive, a vibratory drive for KV1-KV3 vibratory trays, a stepper drive for
feeders that utilizes a stepper bi-phase motor and lastly, an AC drive
interface pc board for use with variable frequency drives (VFD) or
remote DC drives.
This manual will describe the full family of KCM components, including
all drive applications supported.
The KCM is available in two packages: full local keypad and 3.5“ color
LCD (KCM-KD) or 4 LED status display (KCM-SD).
To Next Page
Loading...
