K-TRON KCM - Page 65

Docu-No.: 1090020601-EN Rev. 1.2.1 Page 65
KCM Set-Up 5
Vibratory drive set-up 5.6
Fig. 5.2 Displacement label
1. Switch the feeder to <Volumetric> mode.
2. Start the feeder.
3. Read displacement from label on vibratory drive.
4. Calculate <Vib Span> according to the following formula.
Vibratory span formula:
New <Vib Span> = (Displayed Vib Span)* (expected displacement/Actual
displacement.)
5. Enter calculated new <Vib Span> in the MACHINE menu.
Example: Vibratory type = KV2, actual displacement = 1.1 mm,
displayed <Vib Span> = 1.000
New <Vib Span> = 1.00 * (1.0 mm/1.1 mm) = 0.9
3
2
1
0