EasyManuals Logo
Home>KEB>Controller>COMBIVERT F6

KEB COMBIVERT F6 Programming Manual

KEB COMBIVERT F6
544 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #120 background imageLoading...
Page #120 background image
Braking transistor
120
© 2022 KEB Automation KG
Power and temperature calculation at the braking resistor
Index
Id-Text
Name
Function
0x351F
is31
braking resistor data
Parameter structure for displaying the power at the
braking resistor
Sub Idx
Name
Function
1
rated resistance at 20°C
Resistance value of the braking resistor
2
average dissipated power
average absorbed power of the braking resistor
Change of the time constant:
previous softwares: PT1 time = 4.3 min
new time constant: 2 minutes
3
current electrical resistance
Only for sub-mounted braking resistor:
Actual electrical resistance from the temperature
model.
Display when the power unit is not ready:
4294967295: power unit not ready
Without sub-mounted braking resistor identcal with
is31[1]
4
current wire temperature
Actual wire temperature in 0.1 °C resolution
Display if no temperature model is available: -1000:
no temperature available
Display when the power unit is not ready:
32767: power unit not ready
5
peak wire temperature
For sub-mounted braking resistor:
Maximum wire temperature in 0.1 °C resolution
Without sub-mounted braking resistor:
Display -1000: no temperature available
6
peak power over braking
resistor
Maximum power at the braking resistor
(maximum value of is31[9], stored non-volatile)
7
error resistor data
0: Data for sub-mounted braking resistor OK
All other values: invalid sub-mounted braking resistor
data
8
cumulated energy over
braking resistor
cumulated energy over braking resistor
(resolution: 0.01 kWh)
The value can be reset / set to any value by writing to
the parameter.
9
current power over braking
resistor
Actual power flowing into the braking resistor. The fil-
ter time is calculated from the basic process time
(see description is22)
Filter time without sub-mounted braking resistor: TFil-
ter = 48 * basic Tp
(at Tp = 62.5us TFilter is = 48 * 62.5us = 3ms)
Filter time with sub-mounted braking resistor: TFilter
= 64 * basic Tp
Notice

Table of Contents

Other manuals for KEB COMBIVERT F6

Questions and Answers:

KEB COMBIVERT F6 Specifications

General IconGeneral
BrandKEB
ModelCOMBIVERT F6
CategoryController
LanguageEnglish

Related product manuals