5.11 Inverter data
The most important inverter characteristics are displayed in the inverter data.
The limits dependent on the power unit are displayed for some parameters (de32
tripping threshold undervoltage , de29 inverter maximum current).
The actual limit can be changed by parameter settings.
Not all parameters are available for all control types (A or K).
Serial number of the inverter
Configurations ID (number of the parameter
description for COMBIVIS)
Control card type
(Fieldbus type, hardware version)
Power unit software version
Saved power unit identifier
Actual power unit identifier
Inverter software current limit
inverter maximum DC voltage
Tripping threshold overvoltage error
inverter minimum DC voltage
Tripping threshold undervoltage error
inverter rated switching frequency
Rated switching frequency
inverter maximum switching frequency
Maximum switching frequency
inverter intermed.circuit capacity [uF]
braking transistor default level
Default level for braking transistor activation
Unique identification number of the safety
functionality Part 1
Saved type of the safety module
Unique identification number of the safety
functionality Part 2
To Next Page
Loading...
Need help?
General
