Model control (ASM and SM)
In which speed ranges the model should be active is adjusted with this parameter
in operating modes with motor model.
6.2.16.1 Model deactivation
Model deactivation in encoderless
operation
Model deactivation in operation with
speed encoder
(Asynchron) Vektore Current Close
Loop. Current-controlled operation,
operates with precontrol of the
torque
Asynchron Single Current Close
Loop
This operating mode is designed for
stable concentricity at low speeds
and motor operation. The error in the
stator resistance is important for the
stability of the operation, by way
there are deviations from the real
speed under load.
To Next Page
Loading...
Need help?
General
