KEB COMBIVERT F6

Inverter data
214
© 2022 KEB Automation KG
The software version of the single modules can be read with the following objects.
The display is a hexadecimal value.
de16
ctrl software version
0x2010
de18
fpga core version
0x2012
de24
power software version
0x2018
de42
safety software version
0x202A
de44
KTY software version
0x202C
de52
enc interf software version
0x2034
Bit
Function
Value
Notes
0…7
Number
of date codes
0…FF
Is increased in case of minor modifications which require no
new parameters or error correction.
8…15
Customer ver-
sion
0…FF
Is used to identifier customer / special versions
16…23
Minor version
0…FF
Is increased when introducing new parameters or functions
24…31
Major version
0…FF
Increased only at general changes
Example: Software version 0201000Ch (hexadecimal) = 33619980 (decimal)
Main version: 2
Sub-version: 1 standard version date code: 12dec (= 0C hex)
de50
fieldbus stack version
0x2032
Note
Shows the stack version of the RTE module of the adjusted fieldbus
The software date can be read with the following objects:
de17
ctrl software date
0x2011
de19
fpga core date
0x2013
de25
power software date
0x2019
de43
safety software date
0x202B
de45
KTY software date
0x202D
de51
fieldbus stack date
0x2033
de53
encoder interf software date
0x2035
Date format
Value
Display
YYYY.MM.DD
(year, month,
day)
= YYYY*10000 + MM * 100 +
DD
The decimal value representing the date is dis-
played directly without separators
Example: Software date 20.01.2016 => display: 20160120