Calculation of the reference idle current
• Magnetizing current (Chapter 6.2.5 )
• Maximum voltage (Chapter 6.2.10.3 )
• Synchronous motor with reluctance torque (Chapter 6.2.5.2.3 )
• Model stabilization
• Stabilisation current / standstill current (only SCL) (Chapter 6.2.16.3 )
• Sine-wave filter and capacitor current compensation (Chapter 6.2.23 Sinus filter)
Limitation to the max. reactive current
• Current (Chapter 6.2.8 )
Adaptation and saturation characteristic of the motor equivalent circuit diagram data
Motor model
• Rotor position detection in operation at SCL (hf injection) (Chapter 6.2.3.6 )
• Model control (ASM and SM) (Chapter 6.2.16 )
• Model stabilization
• Stabilisation current / standstill current (only SCL) (Chapter 6.2.16.3 )
• Adaption (Chapter 6.2.12 )
Saturation characteristic
• Saturation characteristic (SM) (Chapter 6.2.13 )
Adaption (only with motor model)
• Adaption (Chapter 6.2.12 )
• Control mode (with encoder / encoderless) (Chapter 6.2.15 )
Motor model with estimated rotor position (only for SM)
Speed estimation
• Model control (ASM and SM) (Chapter 6.2.16 )
• Model stabilization
• Stabilisation current / standstill current (only SCL) (Chapter 6.2.16.3 )
Rotor position detection (SM)
• Rotor position detection in operation at SCL (hf injection) (Chapter 6.2.3.6 )
• System offset (Chapter 6.2.3.5 )
• Parameterization of the encoder system (Chapter Interface to the encoder 6.1)
• System offset (Chapter 6.2.3.5 )
• Control mode (with encoder / encoderless) (Chapter 6.2.15 )