Kenwood NX-5200K3 Common Function Reference

Selecting a category folder and pressing the Menu ([Q]) key displays
the audio data folders stored in the category folder.
Selecting an audio data folder and pressing the Menu ([Q]) key displays
the audio data stored in the audio data folder in a list.
Note
0
A folder in which no audio data is stored is not displayed.
0
The oldest audio data is displayed as list number 1.
0
Each list of audio data is displayed in the format of either the recording
start
date and time or the ID of the transmitting transceiver. Pressing the
[E] key or [F] key can switch the display. The recording start date and
time is displayed according to the configurations in Date Format and
Time Format.
0
If no audio data is stored, “Empty” is displayed for 1 sec.
2
Press the [ ] key or [ ] key to select the audio data, and then press the Menu ([ ]) or [ ] key.
A Key Beep A (1 beep) sounds from the transceiver, the playback screen
appears, and playback of the audio data starts.
If playback of the audio data having the last list number ends, the list display is restored.
The following operations are enabled during playback:
Next
12 : 34
A
M
07/28/ ’ 15 11:35A
07/27/ ’ 15 10:54A
07/26/ ’ 15 9:23A
Back
Playback 1
Play
12 : 34
A
M
07/28/ ’ 15 11:35
07/28/ ’ 15 14:20
07/28/ ’ 15 15:23
Back
Playback 1
Pause
12 : 34
A
M
Back
Playback 1
00:00/00:45
UID 65519
Play
12 : 34
A
M
01/23/ ’ 14 9:23A
01/23/ ’ 14 9:35A
01/23/ ’ 14 2:20P
Delete
Playback 1
9 STORING RECORDED AUDIO/ GPS DATA
9.4 Playing Back the Recorded Audio (Playback)
Common FUNC (K, F)/Ver 2.20 167
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English