Kenwood NX-5200K3 Common Function Reference

Table 9-6 Operations during Playback
Transmission
Operation
Description
Pause
Pressing the Menu ([Q]) or [*] key pauses the playback of audio data. Pressing the Menu
([Q])
or [*] key again resumes the playback of audio data.
Cue
Pressing the [E]
key cues to the beginning of the audio file being played back, and then starts the
playback. If the [E] key is pressed again before the playback of audio data starts, the playback
starts after cuing to the beginning of the audio data which has the previous list number. Pressing
the [F] key cues to the beginning of the audio data which has the next list number, and then starts
the playback. Pressing the [F] during playback of the audio data which has the last list number
ends the playback and the list display is restored. If the playback is being paused, the audio data
is cued while remaining in the paused state.
Rewind
While the [E] key is pressed and held, the audio data being played back continues to rewind.
Releasing the [E]
key starts the playback from the point. If the [E] key continues to be pressed
and held until the rewinding reaches the beginning of the audio data being played back, the
rewinding pauses. Furthermore, if the [E] key continues to be pressed and held, the rewinding is
resumed from the end of the audio data which has the previous list number. If the rewinding
reaches the beginning of the audio data with the list number 1, the rewinding ends and the audio
data having the list number 1 is played back. If the playback is being paused, the audio data is
rewound while remaining in the paused state.
Fast forward
While the [F]
key is pressed and held, the audio data being played back continues to fast-forward.
Releasing the [F] key starts the playback from the point. If the [F] key continues to be pressed
and held until the fast-forwarding reaches the end of the audio data being played back, the fast-
forwarding pauses. Furthermore, if the [F] key continues to be pressed and held, the fast-
forwarding is resumed from the beginning of the audio data which has the next list number. If the
fast-forwarding reaches the end of the audio data having the last list number, the fast-forwarding
and playback end and the list display is restored. If the playback is being paused, the audio data
is fast-forwarded while remaining in the paused state.
End of playback
Pressing the Back
([O]) or [#] key restores the list display and the playback of the recorded data
ends.
0
Deleting an audio datum
1
Press the Playback key to display the audio data.
Refer to step 1 of “Playing back the audio data”.
2
Press the [ ] or [ ] key to select the audio data to be deleted.
3
Press the Back ([ ]) or [ ] key after pressing the Function
([
]) key.
The screen to confirm whether to delete the audio data appears.
Play
12 : 34
A
M
01/23/ ’ 14 9:23A
01/23/ ’ 14 9:35A
01/23/ ’ 14 2:20P
Delete
Playback 1
OK
12 : 34
A
M
Delete?
Back
Playback 1
9 STORING RECORDED AUDIO/ GPS DATA
9.4 Playing Back the Recorded Audio (Playback)
Common FUNC (K, F)/Ver 2.20 168
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English