Kenwood NX-5200K3 Common Function Reference

0
The configuration in Tone Volume applies to the volume level of a tone emitted from a Bluetooth-compatible device as
follows. (Refer to Configuring the Volume Level of Various Tones (Tone Volume).)
Table 10-6 Tone Volume
Tone Volume Description
Current The tone volume is linked to the reception volume level adjusted in a Bluetooth-compatible device.
1 to 31
The tone sounds from a Bluetooth-compatible device with a fixed tone volume. Higher values result
in greater volume.
Off The tone does not sound from a Bluetooth-compatible device.
Selectable
The tone volume varies in conjunction with the Fixed Volume key. (Refer to Changing the Tone
Volume Level with a Single Touch (Selectable Tone Level).)
0
The sound quality function behaves as follows. (Refer to Configuring Audio Profile (Audio Profile).)
Table 10-7 Sound Quality Function
Type Function Configuration
RX Audio Response Auto Gain Control Yes
Audio Equalizer (High) Yes
Audio Equalizer (High Midrange) Yes
Audio Equalizer (Midrange) Yes
Audio Equalizer (Low Midrange) Yes
Audio Equalizer (Low) Yes
Speaker Type
Yes
*1
TX Audio Response Auto Gain Control Yes
Audio Equalizer (High) Yes
Audio Equalizer (High Midrange) Yes
Audio Equalizer (Midrange) Yes
Audio Equalizer (Low Midrange) Yes
Audio Equalizer (Low) Yes
Microphone Type
Yes
*1
Active Noise Reduction ANR Preset Mode Yes
Vocoder Yes
DSP Yes
Noise Attenuation Level Yes
Low Noise Level Adjustment Yes
Optimization based on Microphone Position
No
*2
Siren Yes
Vibration (Alert Device) Yes
Battery Save for Noise Reduction
Yes
*3
*1
Behaves as the configuration of “None”.
*2
Behaves as the configuration of “Off”.
*3
For Portable, behaves as the configuration of “On”, and for Mobile, behaves as the configuration of “Off”.
Yes:
Indicates that the configuration is enabled when connected to a Bluetooth-compatible device and that the sound quality
function behaves as configured.
No: Indicates that the configuration is disabled when connected to a Bluetooth-compatible device.
10 BLUETOOTH COMMUNICATION
10.5 About Headset Profile (HSP Connection/ HSP Disconnection)
Common FUNC (K, F)/Ver 2.20 198
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English