Kenwood NX-5200K3 Common Function Reference

14.2
Adjusting the Time
Pressing the Clock Adjustment key causes the transceiver to enter Clock Adjustment Mode and then date and time can
be adjusted.
Also,
pressing the Menu key causes the transceiver to enter Menu Mode, and then the transceiver enters Clock Adjustment
Mode by selecting “Clock Adjustment” and the date and time can be adjusted. (Refer to Using Menu Mode.)
Note
When the data configured by using KPG-D1/ D1N is written to the transceiver, the date and time of the internal clock of
the
transceiver can be adjusted by sending the date and time configured on the PC to the transceiver. (
Program
> Write Data to the Transceiver > Time Adjustment)
Operating the transceiver
The following is the operation example when “Year/Month/Day” is configured in Date Format
and “12H” is configured in
Time Format:
1
Press the Clock Adjustment key.
A Key Beep A (1 beep) sounds from the transceiver, and then the
transceiver enters Clock Adjustment Mode.
The
following operations are the same even if the transceiver enters Clock
Adjustment Mode by pressing the Menu key.
2
Configure the year by pressing the [
] or [ ] key, and then press the [ ] key.
3
Configure the month by pressing the [
]
or [
] key, and then press the [ ] key.
12 : 34
A
M
Date 13/04/19
Time 12:34
PM
BackOK
Clock Adjust
12 : 34
A
M
Date 14/04/19
Time 12:34
PM
BackOK
Clock Adjust
12 : 34
A
M
Date 14/05/19
Time 12:34
PM
BackOK
Clock Adjust
14 ADJUSTING THE TIME ON THE TRANSCEIVER
14.2 Adjusting the Time
Common FUNC (K, F)/Ver 2.20 238
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English