Kenwood NX-5200K3 Common Function Reference

15.6
Checking the Firmware Version (Transceiver Information
Mode)
Transceiver Information Mode is the function to display the version of the firmware written in the transceiver and the firmware
version and hardware version of the SCM.
Operating the transceiver
1
Turn the transceiver ON while pressing and holding the Side 3 key (Portable/ KCH-21R (Handheld Control
Head)) or the [
] key (Mobile).
The transceiver enters Transceiver Information Mode. The version number
of the transceiver written to the transceiver appears.
2
Toggle the display by pressing the [ ] or [ ]
key.
The display toggles as follows:
Firmware
K xx.xx.xx
Version Info
Info +
[ ] key
[ ] key
[ ] key
[ ] key
[ ] key
[ ] key
Firmware
-- . - . -
Version Info (SCM)
Info +
Hardware
- . - . -
Version Info (SCM)
Info +
Firmware
K xx.xx.xx
Version Info
Info +
15 MODE
15.6 Checking the Firmware Version (Transceiver Information Mode)
Common FUNC (K, F)/Ver 2.20 245
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English