Kenwood NX-5200K3 Common Function Reference

About the Connection of the Control Head to the RF Deck
This section describes how to connect the Control Head and RF Deck.
The following explanations use images of the Dip switch. If the Control Head and RF Deck are in the factory default
configurations, do not change the configuration of the Dip switch.
How to Assemble Remote Control Mount
Dip Switch
Connector for KCT-71
Deck Side
Connector for KCT-72
Display Side
ON
ON
ON
ON
Figure 17-11 Connector Arrangement and Cable Connection
1) 5BM/ 5FM
DECK
1
HEAD
1
KCT-71
Figure 17-12 Single Deck Single Head Remote Mount
17 STRUCTURING A MULTI RF DECK/ MULTI CONTROL HEAD
17.1 Initial Configuration for Multi RF Deck/ Multi Control Head
Common FUNC (K, F)/Ver 2.20 342
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English