0
Even if RF Deck 3 is removed, by connecting Control Head 2 to KCT-71 of RF Deck 2 and by changing the
configuration
of the DIP switch, the system can operate in a system of a Dual RF Deck/ Dual Control Head structure
even without overwriting the configuration data. However, “Unit Not Found” appears on the display.
2
Control Head
RF Deck 2
KRK-15B
1
Control Head
RF Deck 1
KRK-15B
OFF ON ON ON
RF Deck 1
RF Deck 2
Control Head 1
Control Head 2
Figure 17-61 Dual RF Deck/ Dual Control Head
3
Restore RF Deck 3 to the previous state after the repair of RF Deck 3 completes.
2
Control Head
RF Deck 3
KRK-15B
RF Deck 2
KRK-15B
1
Control Head
RF Deck 1
KRK-15B
Figure 17-62 Triple RF Deck/ Dual Control Head
17 STRUCTURING A MULTI RF DECK/ MULTI CONTROL HEAD
17.7 Reconnecting a Removed RF Deck
Common FUNC (K, F)/Ver 2.20 370
CONTENTS INDEX