Kenwood NX-5200K3 Common Function Reference

19.3
Available Functions for the Selector
Supported Models: Portable
By using KPG-D1/ D1N, the following functions can be assigned to the Selector. What function can be selected varies
depending on the configuration in 16 Zone/Channel Selector.
0
If 16 Zone/Channel Selector is enabled
Table 19-4 Available Functions for the Selector
Function Name Description
Available
Communication
Systems
*1
None
No function is activated. Rotating the Selector causes the Key-entry Error
Tone (1 beep) to sound.
ALL
Channel Select
Rotating the Selector causes the transceiver to migrate to the channel
having the same number specified by the pointer of Selector.
ALL
Zone Select
Rotating the Selector causes the transceiver to migrate to the zone
indicated by the pointer of the Selector.
ALL
Site Select
Turning the Selector causes
the transceiver to migrate to the site specified
by the Selector. (Refer to NXDN FUNC Locking the Site to Be Used (Site
Lock/ Site Select).)
NXDN Trunking
*1
ALL indicates a function that can be used in all systems.
0
If 16 Zone/Channel Selector is disabled
Table 19-5 Available Functions for the Selector
Function Name Description
Available
Communication
Systems
*1
None
No function is activated. Rotating the Selector causes the Key-entry Error
Tone (1 beep) to sound.
ALL
Channel Up/
Down
Rotating the Selector causes the channel number to be increased or
decreased in steps of 1.
ALL
Zone Up/Down
Rotating the Selector causes the zone number to be increased or
decreased in steps of 1.
ALL
Site Up/Down
Turning the Selector increases
or decreases the site number in steps of 1.
(Refer to NXDN FUNC Locking the Site to Be Used (Site Lock/ Site
Select).)
NXDN Trunking
*1
ALL indicates that a function can be used in all the following communication systems:
0
Analog Conventional
0
P25 Conventional
0
P25 Trunking
0
NXDN Conventional
0
NXDN Trunking
0
DMR Conventional
Configuration using KPG-D1/ D1N
0
Assigning functions to the Selector of the transceiver (
Transceiver Settings > Key Assignment > Top/Side)
0
Configuring 16 Zone/Channel Selector to be enabled or disabled ( Transceiver Settings > Key Assignment >
Top/Side)
19 CONFIGURATION FOR EACH FUNCTION
19.3 Available Functions for the Selector
Common FUNC (K, F)/Ver 2.20 416
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English