Kenwood NX-5200K3 Common Function Reference

Configuration using KPG-D1/ D1N
Assigning functions to the COM port
(
Transceiver Settings > Optional Features > Optional Features 1 > Serial
Interface > COM Port)
Flow Control of the Communication Port (Flow Control)
Flow Control is the function that operates a port as the flow control port when the transceiver sends data communications
using Transparent. (Refer to NXDN FUNC Transparent.)
Caution
For Portable, if “RTS/CTS” is configured in Flow Control, both the external microphone and the external PTT do
not function.
Note
For COM port Bluetooth, the flow control does not function regardless of the configuration in Flow Control.
Configuration using KPG-D1/ D1N
Configuring Flow Control (
Transceiver Settings > Optional Features > Optional Features 1 > Serial Interface >
COM Port)
19 CONFIGURATION FOR EACH FUNCTION
19.4 Available Functions for COM Port
Common FUNC (K, F)/Ver 2.20 422
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English