Mode Reset Timer
Mode Reset Timer
is the timer for canceling the standby status of further key entry in Function Mode, and for canceling the
function activation status of 2nd Function. By using this function, Function Mode does not need to be disabled manually.
The function also helps by canceling the Function Mode automatically so as not to remain in Function Mode for too long a
time.
The transceiver has some special Function Modes. When the transceiver enters one of these modes, a preprogrammed
display appears on the main display and sub-display and the Mode Reset Timer starts counting down the time. If no key
is pressed before the amount of time configured in Mode Reset Timer expires, the transceiver returns to the previous mode.
If a Function key is pressed, the transceiver waits for a function configured for 2nd Function to be activated, and then Mode
Reset Timer starts counting down. If no key is pressed before the amount of time configured in Mode Reset Timer expires,
the transceiver cancels waiting for the function to be activated. Mode Reset Timer can be extended by key operation.
Mode Reset Timer is used for the following Function Modes:
Table 3-3 Objective Function Modes for Mode Reset Timer
2-tone Mode
Activity Detection Mode
*1
ANR Preset Mode
*1
Audio Profile Mode
*1
Auto Dimmer Mode
*1
Autodial Mode
Autodial Programming Mode
AUX Mode
*1
AUX A/B/C Mode
*1
Battery Information Display Mode
*1
Bluetooth Mode
*1
Bluetooth Device Mode
*1
Bluetooth Find Device Mode
*1
Bluetooth Headset Connection Type Mode
Bluetooth Information Mode
*1
Bluetooth My Devices Mode
*1
Bluetooth Speaker Mode
*1
Broadcast Mode
*1
Channel Entry Mode
Clock Mode
*1
Clock Adjustment Mode
Color Scheme Mode
*1
Direct Channel & OST Mode
Display Format Mode
*1
Eject SD Card Mode
External Mic Sense Mode
*1
External Speaker Mode
Fixed Volume Mode
*1
Format SD Card Mode
Forward Mode
3 BASIC OPERATIONS
3.3 Using Function Keys
Common FUNC (K, F)/Ver 2.20 30
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
