STEM
• PADS: on the left side of the STEM page there are five big virtual pads. On each pad you
can load a different audio file (only .wav files) that will play in loop, synchronized with the
other tracks. Tap on a pad to mute or unmute a track (muted tracks will be greyed out). Tap
and keep pressed to load an audio file.
• VOL: adjusts the volume of the lead track. Tap on the VOL button and use the Value Dial to
adjust the volume. Values range from 0 to 127.
• SCENE A/SCENE B/SCENE C/SCENE D: load the corresponding scene. On each scene
you can load up to five synchronized audio files.
• LOAD: load a previously saved Stem Project.
• NEW: clear all the scenes and the pads and initialize a new Stem Project.
• AUTOPLAY: enables the automatic switch from a scene to another. When a loop cycle is
completed, the instrument will automatically switch to the next scene.
• SOLO: isolates the desired track and mutes all the others. Tap on the SOLO button and then
tap on the desired pad to solo the track (muted tracks will be greyed out).
• LEVEL: adjusts the volume of a track. Tap on the LEVEL button and then tap on the desired
pad. Use the Value Dial to adjust the volume of the selected track. Values range from 0% to
200%.
• CLEAR: unloads a track from a pad. Tap on the CLEAR button and then tap on the desired
pad to remove the audio file from the pad.
• FIXED: enables or disables the transposition on a track. Tap on the FIXED button and then
tap on the desired pad to make the track unaffected by the transposition. This is useful for
the drums and percussion tracks whose pitch should never be changed.
KETRON - LOUNGE 99
To Next Page
Loading...