KETRON Lounge - Audio Edit

MENU
Audio Edit
Within the AUDIO EDIT page, you can cut, copy and splice an audio file (only .wav files, 44100
Hz and 16 bit resolution).
To edit an audio file follow the following steps:
• Use the Value Dial to select an audio file in the FILE BROWSER, it will be highlighted in
orange.
• Press MENU.
• Tap on the AUDIO EDIT button of the MENU page. The AUDIO EDIT page will be
displayed on screen.
NB: you can also access the AUDIO EDIT page also by tapping on the WAVEFORM of the AUDIO
RECORDER window.
The name of the opened audio file is shown at the top of the page. The waveform is shown just
below the name.
• WAVE START: moves the locator at the beginning of the file.
• WAVE STOP: moves the locator at the end of the file.
• CUT: cuts the file form the beginning to the locator position. The cut portion of the file will
be deleted.
• NORMALIZE: adjust the volume based on the highest signal level present in the recording.
Amplifies the signal until the highest peak is at 0 dB.
• VOLUME: adjust the volume of the file in percentages.
• LOOP: assigns metadata loop data to an audio file.
128 - KETRON - LOUNGE