MENU
Voicetron
The voicetron (also known as “Harmonizer” or “Vocalizer”) is a special effect that harmonizes the
input audio by creating pitch shifted replicas of the original signal, creating chords out of the
melody. The pitch shift amount is controlled by the notes played on the keyboard or by the notes
saved in a MIDI track. The vocalizer is equipped with its own 4 band parametric equalizer.
• ON/OFF: enables or disables the voicetron.
• PRESET : tap on the box to select a voicetron preset between RIGHT, UNISON, MIDI, 2ND
UP, 2ND DOWN. Use the Value Dial to scroll through the available ones and tap on the
name to load a preset.
• VOL: controls the voicetron volume. Tap on the virtual knob and use the Value Dial to
adjust the value.
• REV: controls the reverb send amount. Tap on the virtual knob and use the Value Dial to
adjust the value. The reverb type and global volume are set in the DSP page.
• EQUALIZER ON/OFF: enables or disables the voicetron equaliser.
• EQUALIZER PRESET: tap on the box to select an equalizer configuration. Use the Value
Dial to scroll through the available ones and tap on the name to choose a configuration.
• VIEW: edit the equalizer parameters.
• LOCK: prevents MIDI files from changing the Voicetron preset.
• OCTAVE: modifies the octave of the harmonization (works only with the MIDI preset).
Voicetron preset description
You can load one of the VOICETRON presets by tapping on the VOICETRON PRESET button.
There are 5 factory presets and 5 user presets.
• RIGHT: the harmonization is controlled by the notes played on the right part of the
keyboard.
• LEFT: the harmonization is controlled by the notes played on the left part of the keyboard.
• UNISON: doubles the voice.
• MIDI: the harmonization is controlled by the voicetron track of the MIDI file.
• OCTAVE DOWN: doubles the voice an octave down.
• OCTAVE UP: doubles the voice an octave up.
150 - KETRON - LOUNGE
To Next Page
Loading...