MENU
NB: this velocity curve replaces the one set in the CONTROLS page.
• LEFT VELOCITY: same of RIGHT VELOCITY, but is applied to MIDI Note On messages
generated by the basses and chords keys instead.
• SUSTAIN: sets the amount of sound that should be sustained after a Note Off MIDI
message is received on the BASS channel. If enabled, the sound will not stop immediately
after a key is released, but it will decay to zero in a certain amount of time. Tap on the
button to enable or disable the sustain and use the Value Dial to adjust the sustain time.
NB: this sustain value replaces the one set in the BASS EDIT page.
• LEFT DRUM: allows you to the manually play drums and percussion sounds using the bass
and chords keys. All Note On events received on the BASS channel will trigger the two
sounds on the left side of the box. All Note On events received on the CHORD channel will
trigger the two sounds on the right side of the box. For example pressing a BASS key will
play the Kick1 and the Ride1, while pressing a CHORD key will play the Snare1 and the
Stick. To select the sounds to be played, tap on the corresponding box and then tap on the
desired sound on the pop up window that will open up. Tap on the box next to the sound
name and use the Value Dial to adjust the percussion levels. Values range from 0 to 127.
• OCTAVE: sets the transposition of all sounds. Tap on the box next to the sound name and
use the Value Dial to adjust the octave transposition. Values range from -2 to +2.
• PAN: sets the position on the stereo panorama of the BASS and the CHORD sounds. Tap on
the box next to the sound name and use the Value Dial to adjust the panorama position.
Values range from -64 (L) to 64 (R) with 0 being the centre position (>|<).
• REVERB: sets the reverb send amount of the BASS and the CHORD sounds. Tap on the
box next to the sound name and use the Value Dial to adjust the reverb send amount. Values
range from 0 to 127.
• CHORUS: sets the chorus send amount of the BASS and the CHORD sounds. Tap on the
box next to the sound name and use the Value Dial to adjust the chorus send amount. Values
range from 0 to 127.
• REGIS: displays the REGISTRATION list on screen.
108 - KETRON - LOUNGE
To Next Page
Loading...