MENU
• VELOCITY CURVE: determines how the MIDI velocity messages are generated when a
key is pressed. Different velocity curves generate different MIDI velocity values for the
same force applied to the key. You can choose between the following curves (default is
SOFT):
◦ SOFT: makes higher velocities harder to play.
◦ MEDIUM: the default curve, follow a linear response.
◦ HARD: makes higher velocities easier to play.
◦ FIXED: regardless of the force applied to the key, the MIDI velocity value generated is
always the same.
NB: if the ACCORDION CLASSIC mode is enabled, this curve is replaced by the one
defined in the ACCORDION CLASSIC page.
• VELOCITY FINE: makes fine adjustments to the velocity curve slope. Positive values make
easier to play higher velocities, negative values make harder to play higher velocities.
Default is 20.
• VELOCITY FIXED: set the constant MIDI velocity value generated by a key press.
• DUAL DOWN: duplicates MIDI note on and MIDI note off incoming messages generated
by an external MIDI keyboard. The duplicate notes will play an octave down (-12
semitones). This button is a duplicate of the one you can find in the VOICE EDIT page.
• DUAL UP: duplicates MIDI note on and MIDI note off incoming messages generated by an
external MIDI keyboard. The duplicate notes will play an octave up (+12 semitones). This
button is a duplicate of the one you can find in the VOICE EDIT page.
• LEFT/DRUM: enables or disables the volume pedal for the DRUM and the LEFT parts (the
LEFT parts are the BASS part (anything that is received on the BASS channel) and the
CHORD part (anything that is received on the CHORD channel, see ACCORDION
CLASSIC to know more about the CHORD part). Default is off.
• PLAYER: enables or disables the volume pedal for the PLAYER and the STEM. Default is
on.
• PEDAL CURVE: sets the curve that will be applied to messages generated by the volume
pedal in order to distribute high and low values over different ranges of controller positions.
Tap on the button and use the Value Dial to choose between NORMAL, SMOOTH, FAST,
CLOSE1, CLOSE2 and CLOSE3. Default is NORMAL.
136 - KETRON - LOUNGE
To Next Page
Loading...