MENU
• BPM: controls the metronome speed. Tap on the box and use the Value Dial to increase or
decrease the rate at which the metronome is running.
• OUT: controls if the metronome would be heard with or without the music. This could prove
useful in a live session, where you can send only the click track to the drummer monitor. Tap
on the box and use the Value Dial to select a mode:
◦ SOLO: you will hear only the metronome.
◦ ALL: you will hear both the metronome and all the other audio generated by the
instrument.
• TYPE: selects one of the three available tones for the metronome click. Tap on the box and
use the Value Dial to select a tone.
144 - KETRON - LOUNGE
To Next Page
Loading...