Keysight Technologies 8163A User Manual

100 8163A/B, 8164A/B, 8166A/B User’s Guide
3 Power Measurement
How to Measure Power
The Power Value
The <P> parameter displays the power measurement value. In MinMax
mode, this parameter changes to <
ΔP>, the difference between minimum
and maximum power, see How to Choose the MinMax Mode on page 116.
How to Set the Number of Digits
You can set the maximum number of digits that are used in power
measurement. This is the maximum number of digits after the decimal
point.
To change the number of digits to two:
1 Move to the Power Meter channel and press the [Menu] softkey.
2Move to <Number of Digits> option and press Enter. You will see the
screen in Figure 56 on page -100.
Figure 56 The Number of Digits Menu
3 Move to 2 and press Enter.

Keysight Technologies 8163A Specifications

General

Brand	Keysight Technologies
Model	8163A
Category	Multimeter
Language	English