Keysight Technologies 8163A User Manual

8163A/B, 8164A/B, 8166A/B User’s Guide 23
Getting Started 1
Laser Safety Information
The laser sources specified by this user guide are classified according to
IEC 60825-1.
The laser sources comply with 21 CFR 1040.10 except for deviations
pursuant to Laser Notice No. 50 dated 2007-June-24.
Table 1 Initial Safety Information for Laser Source Modules
81650A 81651A 81652A 81654A
Laser type FP-Laser
InGaAsP
FP-Laser
InGaAsP
FP-Laser
InGaAsP
FP-Laser
InGaAsP
Wavelength (±15nm) 1310 nm 1550 nm 1550/1625 nm 1310/1550 nm
Max. CW output power
1
<1.8 mW <1.8 mW <1.8 mW <1.8 mW
Beam waist diameter 9 µm 9 µm 9 µm 9 µm
Numerical aperture 0.1 0.1 0.1 0.1
Laser Class according to
IEC 60825-1 (2007)
1111
Max. permissible CW output power 15.6 mW 10 mW 10 mW 15.6 mW/10 mW
1
Max. CW output power is defined as the highest possible optical power that the laser source can produce at its output connector.

Keysight Technologies 8163A Specifications

General

Brand	Keysight Technologies
Model	8163A
Category	Multimeter
Language	English