Keysight Technologies 8163A - How to Set All Parameters to Their Default Values; If You Make a Mistake; If the Parameter Changes to Different Value

8163A/B, 8164A/B, 8166A/B User’s Guide 57
Getting Started 1
Figure 25 Averaging Time Menu
How to Set All Parameters to Their Default Values
Press Preset to set all parameters to their default values.
If You Make a Mistake
If you make a mistake while you are editing a parameter, you can cancel
the editing, and retain the previous value for the parameter by pressing the
[Cancel] softkey.
If the Parameter Changes to Different Value
If you press Enter or the [OK] softkey and the parameter changes to a
different value, then you tried to enter a value outside the calibrated range.
The new value is the nearest valid value to the value you entered.