Keysight Technologies 8163A - How to Set the Date & Time

8163A/B, 8164A/B, 8166A/B User’s Guide 65
Additional Information 2
1Press the Config hardkey.
2 Move to the <Contrast> menu option and press Enter. You see a box
displaying the current setting
3 Enter an integer value between zero and one hundred in this box and
press Enter.
How to Set the Date & Time
The instrument uses the date and time when:
• you print out data from an application,
• you save data to diskette from an application, and
• you send the :SYSTem:DATE? or : SYSTem:TIME? GPIB commands, see your
instrument’s Programming Guide for more details.
To set the date and time:
1Press the Config hardkey.
2 Move to the <Date & Time> menu option and press Enter. You see a
box, similar to Figure 30 on page 66, displaying the current date and
time settings.