434 8163A/B, 8164A/B, 8166A/B User’s Guide
15 Cleaning Instructions
Which Cleaning Procedure should I use ?
Light dirt
If you just want to clean away light dirt, observe the following procedure
for all devices:
• Use compressed air to blow away large particles.
• Clean the device with a dry cotton swab.
• Use compressed air to blow away any remaining filament left by the
swab.
Heavy dirt
If the above procedure is not enough to clean your instrument, follow one
of the procedures below. Please consult Cleaning Instructions for this
Instrument on page 424 for the procedure relevant for this instrument.
If you are unsure of how sensitive your device is to cleaning, please contact
the manufacturer or your sales distributor
To Next Page
Loading...
Need help?
General
