Keysight Technologies 8163A - How to Change the Password; If You Forget Your Password; How to Get Information about Modules

8163A/B, 8164A/B, 8166A/B User’s Guide 91
Additional Information 2
How to Change the Password
The password is used for unlocking the instrument. To change the
password:
1Press the Config hardkey.
2 Move to the <Change Password> menu option and press Enter. You
see a box requesting you to enter the password.
3 Enter the current password, using the softkeys or the numerical keypad
and press Enter. You see a box requesting you to enter the new
password.
4 Enter your new password. It should be 4 digits long. Press Enter.
If You Forget Your Password
If you forget your password, contact your nearest Keysight Technologies
Sales/Service Office. Find contact details by accessing
http://www.keysight.com/ on the Internet.
How to Get Information About Modules
To get information about modules:
1Press the Config hardkey.
2 Move to the <About Modules> menu option and press Enter. You see a
box displaying the slots which have installed modules, see Figure 52.