66 8163A/B, 8164A/B, 8166A/B User’s Guide
2 Additional Information
Figure 30 Editing the Date and the Time
3 Use the cursor key to move to the Date field. Press the [Edit] softkey.
The day of the month is highlighted.
4 Use the left and right cursor keys to move to the day, month or year.
Edit the day, month or year using the cursor key. Press Enter.
5 Perform steps step 3 to step 4 again if the date is not fully correct.
6 Use the cursor key to move to the Time field. Press the [Edit] softkey.
The hour of the day is highlighted. The 24-hour clock is used.
7 Use the left and right cursor keys to move to the hour, minute, or
second. Edit the hour, minute, or second using the cursor key. Press
[OK].
8 Perform steps step 6 to step 7 again if the date is not fully correct.
9 When the time and date are both correct, press [Close] to return to the
configuration menu.
To Next Page
Loading...
