8163A/B, 8164A/B, 8166A/B User’s Guide 145
Tunable Lasers 5
Figure 83 Setting a Relative Wavelength
How to Change the Output Wavelength
1Move to [λ] and press Enter. [λ] is the output wavelength, λ, in the
equation above.
2 Enter 1570 and press Enter.
How to Set the Base Wavelength
Note how the frequency offset, [Δf], changes as you change the value of
[
λ].
You cannot set <λ0>, the base wavelength directly.
To Next Page
Loading...
