218 8163A/B, 8164A/B, 8166A/B User’s Guide
8 Setting Attenuation and/or Power Levels
Figure 134 81570A/71A/73A Attenuator module, 8164A/B GUI Details
Screen Elements
All the figures in this chapter are taken from an 8164A/B mainframe. The
user interface for an 8163A, 8163B, 8166A or 8166B mainframe may
display fewer elements. Use the equivalent menu selection instead.
Number of Digits displayed
To select the number of significant decimal places displayed:
1 Press the [Menu] softkey.
2 Use the Cursor key to highlight <Number of Digits>, then press Enter.
3 Select <1>, <2>, <3> or <4>.
4 Press [OK], then press [Close].
To Next Page
Loading...
