252 8163A/B, 8164A/B, 8166A/B User’s Guide
10 Applications
How to Change the Legend Label
To change the legend label:
1 Press the [Menu] softkey and move to <Legend>. A list of the Power
Meter channels appears that is similar to Figure 152 on page -252,
where all the Power Meters are listed numerically with regard to legend
number. All legend texts, if you have not previously edited the legend
text, are of the "PM x.y", where x represents the slot number and y
represents the channel number.
Figure 152 The Graph Legend Screen
2 Move to the legend number you wish to edit using the cursor keys and
press Enter. The on-screen keyboard appears.
3 Use the on-screen keyboard to edit the legend label and press Enter.
You cannot edit a legend label while a measurement is running.
To Next Page
Loading...
