Keysight Technologies 8163A User Manual

390 8163A/B, 8164A/B, 8166A/B User’s Guide
14 Error Messages
error message TCFS Temp. Selftest Failed (error value)
description Verifies if the peltier temperature is within target with a given uncertainty
error value 15010 TCFS peltier temperature is not in target range
action Please return the unit to your local service center for repair
error message TCFS Resistor Selftest Failed (error value)
description This test measures the R
d
of the photodiodes at channel A, B and M
error value 15021 Photodiode R
d
in channel A is below limit
15022 Photodiode R
d
in channel B is below limit
15023 Photodiode R
d
in channel C is below limit
action Please return the unit to your local service center for repair
error message TCFS Attenuator Selftest Failed (error value)
description Verifies whether an attenuator position is repeatable.
error value 15030 Attenuator could not be positioned
action Please return the unit to your local service center for repair
error message Main DC Selftest Failed (error value)
description Tests all fixed DC voltages available at the mainboard mux
error value 23011 +15V Measurement DC voltage not in limits
23012 -15V Measurement DC voltage not in limits
23013 +5V Reference DC voltage not in limits
23014 -5V Reference DC voltage not in limits
23015 negative supply voltage of laser current source not in limits
23016 positive pezo supply voltage not in limits
action Please return the unit to your local service center for repair

Keysight Technologies 8163A Specifications

General

Brand	Keysight Technologies
Model	8163A
Category	Multimeter
Language	English