Keysight Technologies 8163A User Manual

8163A/B, 8164A/B, 8166A/B User’s Guide 419
Error Messages 14
error message InitModuleStruct() failed
description Initialization of module structures failed
test value
action Please return the unit to your local service center for repair
error message Unsupported module type
description Module type described in calibration data not supported by the firmware or incorrect
calibration data
test value
action Please return the unit to your local service center for repair
error message InitSwitchAccess():AllocTpuChannels() for switch failed
InitSwitchAccess():Unsupported switchLocation
SwitchAccessSwitch():Unsupported switchLocation
SwitchInitSequence():Unsupported switchLocation
InitSwitchAccess(): failed
description Initialization of the functionality usedto access the switch hardware failed. Probably a
calibration data problem.
test value
action Please return the unit to your local service center for repair
error message InitSwitchAccess():AllocTpuChannels() for LEDs failed
InitSwitchAccess():Unsupported ledLocation
SwitchAccessLED():Unsupported ledLocation
description Initialization of the functionalityused to access the LEDs failed. Probably a calibration data
problem.
test value
action Please return the unit to your local service center for repair

Keysight Technologies 8163A Specifications

General

Brand	Keysight Technologies
Model	8163A
Category	Multimeter
Language	English