Keysight Technologies 8163A User Manual

424 8163A/B, 8164A/B, 8166A/B User’s Guide
15 Cleaning Instructions
If you are unsure of the correct cleaning procedure for your optical device,
we recommend that you first try cleaning a dummy or test device.
Keysight Technologies assume no liability for the customer’s failure to
comply with these requirements.
Cleaning Instructions for this Instrument
The Cleaning Instructions apply to a number of different types of Optical
Equipment. Table 21 on page -424 lists the sections that are relevant to
the various modules that can be installed in this instrument.
Table 21 Cleaning Instructions for Modules
Modules Instruction
Optical Heads How to clean instruments with an optical glass plate on
page 443
Laser Source Modules How to clean instruments with a physical contact
interface
on page 444
Tunable Laser Modules How to clean instruments with a physical contact
interface
on page 444
Return Loss Modules How to clean instruments with a physical contact
interface
on page 444
LED Source Modules How to clean instruments with a physical contact
interface
on page 444
Power Sensor Modules How to clean instruments with a recessed lens
interface
on page 446

Keysight Technologies 8163A Specifications

General

Brand	Keysight Technologies
Model	8163A
Category	Multimeter
Language	English