348 Keysight EXG and MXG X-Series Signal Generators User’s Guide
Using Avionics VOR/ILS Softkeys for N5171B/72B and N5181B/82B with Option 302
Using VOR [VHF Omnidirectional Range] Softkeys
To set the VOR bearing direction as From or To
1. Press Aux Fctn > Avionics > VOR
2. Press Bearing
3. Press Direction
(Default selection is From.)
4. Select either From | To
From - In the From convention, the VOR transmitter beacon is made the
reference point and the Bearing Angle is between local magnetic-North and
the beacon-to-aircraft radial line (RL).
To - In the To convention, the aircraft is made the reference point and the
Bearing Angle is between local magnetic-North and the aircraft-to-beacon
radial line (RL).
RL
(To)
= 180° – RL
(From)
To set the frequency of the reference signal (REF Freq) and the
variable phase signal (VAR Freq)
1. Press Aux Fctn > Avionics > VOR
2. Press REF/VAR
3. Press REF/VAR Freq
(Default <value> is 30 Hz.)
4. Select a <value> in Hz | kHz | MHz | GHz from 10 to 60 Hz.
Enter a value in Hz to set the frequency of the reference signal (REF Freq) and
the variable phase signal (VAR Freq).
To Next Page
Loading...
Need help?
General
