Keysight EXG and MXG X-Series Signal Generators User’s Guide 83
Front Panel Operation for All Models
Working with Files (Viewing/Storing/Loading/Moving)
Selecting the Default Storage Media
You can configure the signal generator to store user files to either the internal storage or to external
USB media. To automatically switch between USB media and internal storage, depending on
whether USB media is attached, select Automatically Use USB Media If Present. To avoid storing
any confidential information in the instrument, select Use Only USB Media. To avoid storing any
confidential information to USB media, select Use Only Internal Storage.
This selection is unaffected by power-cycle or preset.
File > More >
Current
selection
Memory in the instrument is used, and USB media is ignored.
Media attached to the front panel USB connector is used, and no user
data is stored to internal storage.
This is the recommended selection. When USB media is attached to the
front panel, it is the selected media; when USB media is not attached,
internal storage is used.
For details on each key, use key help as described on page56.
Select the directory on the USB media to be used for all file operations
when USB media is attached and enabled.
To Next Page
Loading...
Need help?
General
