72 Keysight EXG and MXG X-Series Signal Generators User’s Guide
Front Panel Operation for All Models
Working with Files (Viewing/Storing/Loading/Moving)
Working with Files (Viewing/Storing/Loading/Moving)
— File Softkeys on page 73
— Viewing a List of Stored Files on page 74
— Storing a File on page 76
— Loading (Recalling) a Stored File on page 77
— Moving a File from One Media to Another on page 78
— Working with Instrument State Files on page 78
— Selecting the Default Storage Media on page 83
The signal generator recognizes several types of files, such as instrument state files, license files,
and list sweep files. Files can be stored either in the signal generator’s internal storage or on the
USB media. This section provides an overview of how to navigate the signal generator’s file menus,
and how to view, store, load, and move files.
The Keysight MXG and EXG non-volatile internal memory is allocated according to a Microsoft
compatible file allocation table (FAT) file system. Refer to the Programming Guide.
See also: Storing, Loading, and Playing a Waveform Segment on page 155.
To Next Page
Loading...
Need help?
General
