Keysight B2980B Series User Manual

Keysight B2980B User’s Guide, Edition 1 41
Introduction
Front View
Table 1-8 Interface Setup
Task Relevant front panel key
To specify measurement data elements System Menu > I/O > Format > Measure function keys
To specify math and limit test data elements System Menu > I/O > Format > Math/Limit function keys
To specify trace statistical data elements System Menu > I/O > Format > Trace function keys
To select data output format System Menu > I/O > Format > Data Type function keys
To enable or disable byte swap of binary data System Menu > I/O > Format > Data Swap function keys
To set LAN configuration System Menu > I/O > LAN > Config function keys
To see status of LAN interface System Menu > I/O > LAN > Status function keys
To reset all of LAN connections System Menu > I/O > LAN > Reset function keys
To sets LAN settings to the default settings System Menu > I/O > LAN > Default function keys
To enable or disable Media Transfer Protocol for
easy file access
System Menu > I/O > USB function keys
To see status of USB interface System Menu > I/O > USB function keys
To set GPIB address System Menu > I/O > GPIB function keys
To see status of GPIB interface System Menu > I/O > GPIB function keys
To set configuration of Digital I/O System Menu > I/O > DIO > Config function keys
To read or write a value set to Digital I/O System Menu > I/O > DIO > R/W function keys
To set BNC Trigger In/Out System Menu > I/O > BNC function keys

Keysight B2980B Series Specifications

General

Brand	Keysight
Model	B2980B Series
Category	Measuring Instruments
Language	English