Kikusui TOS3200 - Setting the Safety Extra Low Voltage (SELV); Setting the Buzzer Volume

TOS3200 145
Various Settings
8
Remote Control
Parameter Value: 0 Not convert the current (default)
80.0 to 300.0
Unit: V
Response Returns the supply voltage in the <NR3> form.
Setting the Safety Extra Low Voltage (SELV)
SYST:CONF:SELV
Sets the safety extra low voltage (SELV).
Command SYSTem:CONFigure:SELV {<numeric>|MIN|MAX}
SYSTem:CONFigure:SELV? {MIN|MAX}
Parameter Value: 0 Disable the SELV function (default)
10 to 99
Unit: V
Response
Response Returns the safety extra low voltage in the <NR3> form.
Setting the Buzzer Volume
SYST:BEEP:VOL:PASS
Sets the volume of the buzzer that sounds when the judgment is PASS.
Command SYSTem:BEEPer:VOLume:PASS {<numeric>|MIN|MAX}
SYSTem:BEEPer:VOLume:PASS? {MIN|MAX}
Parameter Value: 0 to 10 (default: 3)
Response Returns the buzzer volume for PASS judgments in the <NR3> form.
SYST:BEEP:VOL:FAIL
Sets the volume of the buzzer that sounds when the judgment is FAIL.
Command SYSTem:BEEPer:VOLume:FAIL {<numeric>|MIN|MAX}
SYSTem:BEEPer:VOLume:FAIL? {MIN|MAX}
Parameter Value: 0 to 10 (default: 3)
Response Returns the buzzer volume for FAIL judgments in the <NR3> form.