Kikusui TOS3200 - Inserting a Step in an Existing Program; Deleting a Step

TOS3200 79
Creating Sequence Programs
6
Program Test
Inserting a Step in an Existing Program
Deleting a Step
F1
AUTO 1/2
NTWK:A MODE:RMS ABORT:OFF
00 TC•E
NCPE ––PNRM•NORM––– 1s
01 PCC––––––P
NRM•NORM––– 1s
–– END
PRG
00: -- UNTITLED --
EDIT
AUTO 1/2
NTWK:A MODE:RMS ABORT:OFF
00 TC•E
NCPE ––PNRM•NORM––– 1s
01 PCC––––––P
NRM•NORM––– 1s
02 PCC––––––P
NRM•NORM––– 1s
PRG
00: -- UNTITLED --
EDIT
INS LOWER WAIT TIMER
LOWER : 30µA
UPPER : 15.0mA
WAIT : OFF
TIMER : 1s
UPPER
INS LOWER WAIT TIMER
LOWER : 30µA
UPPER : 15.0mA
WAIT : OFF
TIMER : 1s
UPPER
Press the F1 key.
Select the position where you want to insert a step.
(The new step is inserted above the selected step.)
A copy of step 01 is inserted.
(The selected step number does not change, but
step 02 was step 01 before the INS key was
pressed.)
F1
AUTO 1 / 2
NTWK:A MODE:RMS ABORT:OFF
00 TC•E
NCPE ––PNRM•NORM––– 1s
01 PCC––––––P
NRM•NORM––– 1s
–– END
PRG
00: -- UNTITLED --
EDIT
AUTO 1 / 2
NTWK:A MODE:RMS ABORT:OFF
00 TC•E
NCPE ––PNRM•NORM––– 1s
–– END
PRG
00: -- UNTITLED --
EDIT
Press the SHIFT+F1 key.
Select the step you want to delete.
The selected pattern is deleted.
LOWER : 30µA
UPPER : 15.0mA
WAIT : OFF
TIMER : 1s
INS LOWER WAIT TIMERUPPER
SHIFT
DEL
LOWER
ON/OFF
UPPER
ON/OFF
WAIT
ON/OFF
TIMER
ON/OFF