Kubota MX5100 User Manual

454 pages

To Next Page

TO THE READER

This Workshop Manual has been prepared to provide servicing personnel with

information on the mechanism, service and maintenance of MX5100. It is divided into

three parts, “General”, “Mechanism” and “Servicing”.

■ General

Information on the tractor identification, the general precautions, maintenance check

list, check and maintenance and special tools are described.

■ Mechanism

Information on the construction and function are included. This part should be

understood before proceeding with troubleshooting, disassembling and servicing.

Refer to Diesel Engine / Tractor Mechanism Workshop Manual (Code No. 9Y021-

01874 / 9Y021-18201) for the one which has not been described to this workshop

manual.

■ Servicing

Information on the troubleshooting, servicing specification lists, tightening torque,

checking and adjusting, disassembling and assembling, and servicing which cover

procedures, precautions, factory specifications and allowable limits.

All information illustrations and specifications contained in this manual are based on

the latest product information available at the time of publication.

The right is reserved to make changes in all information at any time without notice.

Due to covering many models of this manual, information or picture being used, have

not been specified as one model.

November 2007

Questions and Answers:

L
loweryantonioSep 12, 2025
What causes low oil pressure in a Kubota MX5100?
- T
  toddsanchezSep 12, 2025
  If your Kubota Tractor has low oil pressure, it could be due to insufficient engine oil (replenish). Other potential causes include a clogged oil strainer (clean), a relief valve stuck with dirt (clean), a weakened or broken relief valve spring (replace), excessive oil clearance of the crankshaft bearing (replace), excessive oil clearance of the crankpin bearing (replace), or excessive oil clearance of the rocker arm (replace). A clogged oil passage (clean), a different type of oil used (use specified type of oil), or a defective oil pump (replace) can also cause low oil pressure.
R
Richard HatfieldSep 14, 2025
What causes water to mix into the lubricant oil in a Kubota MX5100?

General